If the sanitation kit does not turn on
after installing
-The
rubber safety cap was not lifted and turned before installing
-The
sanitation kit’s connector is not fully inserted in the power terminal
1.Remove
the headroom tray. Lift and turn the rubber UV-C cover located in the back
of the headroom to the right to expose
the power terminal.
2.Insert
the sanitation kit level so the kit’s terminal connector inserts fully into the
power terminal.
Firmly press down the back of the
sanitation kit tray, so it is fully inserted into the body of the refrigerator.
-> Be careful to not press the lamp
located on the top
of the tray while installing the sanitation kit
